LCU-3 Transceiver Control Interface


 

LCU-3 Transceiver Control Product Description

Add an additional level of enjoyment and convenience to your ProLog Logging system by controlling your transceiver using the LCU-3 transceiver control interface. Don't spend $100+ on a unit from the radio manufacturer when Datamatrix can offer you 100 percent compatibility for under $55.00!

The LCU-3 transceiver control interface is functionally equivalent to ICOM's CT-17, Kenwood's IF-232C, Yaesu's FIF-232C, TenTec's 305 and the Heath interfaces.

No external power supply is required, all required supply voltages are derived from the serial port itself. This further reduces the risk of RFI pickup by the interface, the rig and the computer. The LCU-3 requires no special software drivers.

Each LCU-3 is fully assembled, tested and includes a ninety-day parts and labor warranty. The LCU-3 is turnkey compatible with the ProLog Logging System. The unit comes complete with a cable fitted with the appropriate plug for your radio. A test plug and a diagnostics diskette are also included with each interface.

Have you run out of Serial Ports? The Datamatrix USCNV unit is a USB to RS-232C converter that will permit you to connect any serial peripheral  to your computer's USB port. Simply connect one end of the  6' cable into your computer's USB port and the other end to your serial device. The serial end of the cable contains a Male DB-9 connector but a separate DB-9 to DB-25 adapter is included to mate those devices utilizing a DB-25 connector. The USCNV is the perfect companion for the LCU-3 level converter. The USCNV product is USB specification revision 1.1 compliant, and will support up to a 1 Mbps transfer rate.


Interface models are listed below.

Model LCU-3I For Icom and TenTec (CT-17 Compatible)
     Supplied with a DB-25 Female connector on one end and a 1/8" phone connector on the other.

Works with Models:
  ICOM:
    IC-271, IC-471, IC-706, IC-706-MII, IC-725, IC-726, IC-728, IC-735, IC-736 IC-737, IC-746, IC-751a, IC-756, IC-756-PRO, IC-756-PROII,  IC-761, IC-764, IC-765, IC775, IC781, IC-970, IC-R71, IC-R72, IC-R700, IC-R7000, IC-R7100, IC-R9000
    aRequires Installation of Manufacturer's UX-14 PCB Optional Hardware.
 
TENTEC:
    DELTA II, ARGONAUT II, OMNI VI, PARAGON


Model LCU-3K For Kenwood (IF-232C Compatible)

     Supplied with a DB-25 Female connector on one end and a DIN connector on the other.


Works with Models:
    TS-50e, TS-140a, TS-440b, TS-450, TS-680c, TS-690, TS-711d, TS-811d, TS-850, TS-940a, TS950, R5000b
   
a
Requires Kenwood IF-10B
b Requires CHSET-1 (Available from Datamatrix)
c Requires Kenwood IF-10C
d Requires Kenwood IF-10A
e Limited Control Capability.


Model LCU-3Y1 For Yaesu (FIF-232C Compatible)
    
Supplied with a DB-25 Female connector on one end and a large DIN connector on the other.


 
Works with Models: FT-736, FT-747, FT-767, FT-980, FT-990, FT-1000, FT-1000D, Heath SB-1400


Model LCU-3Y2 For Yaesu (FIF-232C Compatible)

    
Supplied with a DB-25 Female connector on one end and a Mini-DIN connector on the other.


Works with Models: FT-757GXII, FT-840, FT-890, FT-900

Model USCNV USB To Serial Converter
    
The USCNV unit is USB specification revision 1.1 compliant and will support transfer rates up to 1 Mbps. The unit is a 6'  cable containing a standard USB connector on one end and a Male DB-9 connector on the other. A DB-9 to DB-25 cable adapter and Windows drivers on CDROM are also included.

 


Contact Information
Tech Support and FAX --
Postal Address -- 5560 Jackson Loop NE -- Rio Rancho, NM 87144

For Comments or Questions, Please Use Our Contact Form


ProLog | Order Now | What's New? | Products and Services | Support and FAQ's | Links
 Product Reviews | User Feedback | Downloads | Contact Us | Discussion Forum